Install my Motorola eSIM mid-trip

You're already at destination and the eSIM was never installed. Don't panic — you just need stable Wi-Fi. Three steps, about 10 minutes. Covers Razr 40/50 and Edge 40/50 on Hello UI.

Not sure? See Motorola troubleshooting
Important: stable Wi-Fi is required

Installing an eSIM downloads the profile from the partner network — you need an internet connection to succeed. Without active cellular data, connect to hotel, café, or airport Wi-Fi before starting. Avoid unsecured public Wi-Fi when possible.

Data-only plan — no traditional calls or texts

Good to know: the Simeo eSIM gives you internet access only. Traditional calls and text messages do not go through it. To call or write, use WhatsApp or FaceTime.

On arrival: the same settings everywhere

On arrival, in your phone's settings (not in the app):

  1. Turn on "Data roaming" on your eSIM's line.
  2. Choose this line for mobile data.
  3. Fully restart the phone.
  4. Turn Wi-Fi off, wait up to 5 minutes, then open a page in your browser or in WhatsApp.

The app button only installs the eSIM card: these settings are what give you internet.

1

Connect to stable Wi-Fi

Swipe down to open Quick Settings, tap Wi-Fi, and pick your hotel or café network. Accept the captive portal if one appears (login page that opens in the browser). On Razr, do this on the main unfolded screen, not the cover screen.

Verify it's loading by opening Chrome. If the connection feels slow, switch networks or move closer to the router — installation can fail on unstable Wi-Fi.

Tip: if you enabled roaming on your Canadian line before leaving, temporarily turn it off in Settings › Network & Internet › SIM › [Canadian line] › Roaming so your Motorola doesn't burn Canadian data during install.

2

Install the eSIM from the Simeo app (QR scan)

Open the Simeo app and sign in. Go to My eSIMs › Active plans, tap the "Not installed" card (orange), then "Install". On Motorola, there's no "Install automatically" button (iPhone-only) — tap "Share QR code" to save it as an image.

On the Motorola, go to Settings › Network & Internet › SIM. Tap "+ Add SIM" then "Download a SIM instead": the camera opens. Point at the QR (from a 2nd screen) or use the help option to scan from a saved image. On Razr, do this on the main unfolded screen.

Follow the on-screen prompts to finish the install. Name the line "Travel" when asked, keep your Canadian line as the default data line for now — you'll switch in the next step.

3

Enable Simeo roaming and switch the data line

Go to Settings › Network & Internet › SIM, tap the Simeo line (or visible partner name). Turn on the "Roaming" toggle on this line. A roaming-fee alert may appear — accept, that's normal and expected for a travel eSIM. That toggle opens the connection to the local partner network.

Go back to Settings › Network & Internet › Mobile Data and pick "Simeo". Otherwise the Motorola will keep using the Canadian line in roaming — and that's expensive.

Turn Wi-Fi off now: swipe down to open Quick Settings, then tap Wi-Fi to switch it off. Otherwise the phone keeps using the hotel Wi-Fi and the test proves nothing.

Wait a few minutes (up to 5) for the local network to recognize your eSIM, then open Chrome or WhatsApp. If a page loads, it worked.

Nothing loads? Fully restart the phone: hold the power button, tap "Restart" (or "Power off", wait 30 seconds, then turn it back on). Then repeat the test with Wi-Fi off.

Good news: on Hello UI, the APN auto-configures most of the time — you don't need to touch it (unlike Samsung). If no data after 3 minutes, jump to Motorola troubleshooting.

What if it didn't connect?

We have a troubleshooting guide with the 5 most common symptoms. Most resolve in under 5 minutes. Screenshot of Settings › Network & Internet › SIM in hand, we'll route you to the right symptom.

See Motorola troubleshooting
Cette page a été vérifiée le May 7, 2026 sur Hello UI / Android 14 (Razr 50, Edge 50). Si quelque chose semble obsolète, écris-nous à info@simeo.ca.